Meet Lee Thompson | Account Manager | Fabrication Excellence

Lee Thompson is part of the Fabrication Excellence Account Management team at Energas, with over 18 years of experience in the welding industry and over 10 years with the company. Drawing on his in-depth technical knowledge, Lee works closely with his clients to improve fabrication processes, enhance productivity, and deliver tailored, high-performance solutions

Lee welding at ESAB facilities during a recent ESAB welding & cutting training session.

Technical articles written by Lee

Things to consider when TIG welding aluminium

Working with aluminium is difficult due to its high conductivity and low melting point, while the oxidised film on the aluminium surface has a different melting point and is therefore tricky to work with for even experienced welders.

5 Key Tips for TIG Welding

When undertaking TIG welding there are a few key points to consider which we will go over in this article.

How often should you change the filters and other spare parts on your PAPR air fed welding system?

Properly maintaining your PAPR system boosts productivity and can have a number of benefits from a safety perspective. Below, we review each key consumable and the most practical time to replace it.

Explaining The Different Types Of Gas Regulators

In welding, there are various different gas regulators used. In order to help you work out which is right for you, we have put together this guide.

Single-Stage versus Two-Stage Gas Regulators

Single-stage gas pressure regulators reduce cylinder pressure to delivery or outlet pressure in one step. Two-stage gas pressure regulators reduce cylinder pressure in two steps.

A Guide To Tungsten Electrodes

At Engweld we offer a range of TIG welding electrodes and each is colour coded to identify their distinct characteristics. We’re here to show you what each electrode is best suited for and give you a guide to finding the right electrode.

TIG Welding FAQs

Here we answer the most frequently asked questions around TIG Welding and TIG Welders.

Factors to consider when TIG welding stainless steel

Welding stainless steel is unique and different from welding other metals. It is crucial to understand stainless steel and the different types of stainless steel out there. This article will look at the various important factors to consider.

MIG Welding & TIG Welding – The Gases Used and Why

Gas welding processes, such as MIG welding and TIG welding do not use gases as fuel, unlike other welding processes, but instead, use gases to shield the weld pool from contaminants.

How To Chose The Right Cutting Disc

So you're in need of a cutting disc but you're not sure which one is right for your needs... Worry not, we have put together this handy guide.

TIG Welding For Beginners: Learn the basics

Learn TIG welding basics in this beginner’s guide, covering essential techniques and tips for clean, precise welding in automotive, food production, and more.

Solid Wire vs Flux Cored Wire - Which welding wire to choose

Choosing the right welding wire is crucial for successful MIG/MAG welding. This article provides a comprehensive comparison of solid wire and flux-cored wire, highlighting their differences in appearance, penetration, cost or suitability.